Europrobe - Europrobe Optonuclear - Minicam

• Europrobe 3:

The Europrobe 3 is the new generation of gamma detection device for radioguided surgery.
With a single Readout Module and 9 gamma probe options, Europrobe 3 fulfils all the needs of per-operative and percutaneous detection within 7 major clinical fields: Breast, Gynaecology, Dermatology, Head&Neck, Endocrinology, Urology and Nuclear medicine.
Europrobe 3 module is designed to allow a quick and easy setting up and routine use as well as specific use thanks to an exhaustive panel of functions among them: pre-selected current isotopes, counting and integration time, type of sound, storage of 9 specific configurations.
The Probes are designed to fit with all needs of surgeons and nuclear medicine physicists : shape (angled or straight),length (from small to laparoscopic), high and low energy detector.
The Probes head is built with integrated radiation shielding and collimation material and provides high degree of spatial resolution and protection against scatter radiation. Watertight, Probes can be soaked in disinfection liquid before use. > Europrobe 3 PDF doc







• Europrobe Optonuclear :


• Minicam :
X and gamma ray imaging systems are powerful tools for medical and industrial applications due to a lot of strong advantages. They are parts of several kind of tools like scanner, tomograph, bone densitometer, industrial non destructive control systems: luggage and container inspection, drug or explosives detection, automation of industrial process (food industry...), etc...
CdTe, CZT and Si detectors offer a good compromise between several critical parameters making them good detectors for such systems.

Eurorad has developed a special camera for peroperative detection to enable surgeons to vizualize areas of high uptake during surgery.

This small area (40X40 mm) gamma camera is based on CdTe sensor technology. The hand held ergonomic probe is linked to a real time display module (stand alone – no PC required) Controls are available both from the probe and monitor front panel. Image storage is made directly on a standard recording card (MMC type, 100 images) The light weight probe (700 g) contains the CdTe sensor, a Tantalum collimator and a shield to avoid any interference (rays). With a 2 button-control panel on the probe, the surgeon can easily select and store images.

A flexible 3,5m cable gives enough freedom for a comfortable use in the OR.
The complete image processing system is placed inside the TFT screen module. No additional PC is required. The waterproof front panel is designed to be easily cleaned.
Image storage is made on a standard memory card (MMC) with a current file format (bitmap) and can then be read on any picture viewer (PC or MAC).

> Minicam I PDF doc
> Minicam II PDF doc